- All
- 5S
- Aerospace
- and Poka Yoke
- Automotive
- Aviation
- Blog
- Bridge Manufacturing
- Coatings
- Design
- Draft
- Drone / UAV
- Education
- Equipment
- Escape Rooms
- Exhibits
- Fixtures and Jigs
- Foundry
- Functional Props
- Industrial 3D Printers
- Kaizen
- Large Format 3D Printers
- Machine Shop
- Manufacturing
- Maritime
- Materials
- Medical Devices
- MRO
- News
- Patternmaking
- Quality and Inspection
- Safety
- Technology
- Trending
- Uncategorized
- Veterinary Medicine
Wax and Burnout Filaments for FDM / FFF Printing Wax and burnout-style filaments are used for investment casting, lost-wax-style workflows, jewelry, art
PEI / ULTEM, PEEK, and PEKK for FDM / FFF 3D Printing PEI, commonly sold under the ULTEM name, along with PEEK
-
Tullomer™ for FDM / FFF 3D Printing Tullomer™ is a high-performance polymer from Z-Polymers positioned for demanding additive manufacturing and fiber applications.
-
PPS for FDM / FFF 3D Printing PPS, or polyphenylene sulfide, is a higher-performance engineering polymer known for chemical resistance, dimensional stability,
-
HIPS for FDM / FFF 3D Printing HIPS, or high-impact polystyrene, is a useful FDM/FFF material with two major roles: it can
-
Polyamide / Nylon for FDM / FFF 3D Printing Polyamide, commonly called nylon, is one of the most useful engineering material families
-
ABS and ASA for FDM / FFF 3D Printing ABS and ASA are long-standing industrial thermoplastics used for functional prototypes, tooling, housings,
-
PETG and PCTG for FDM / FFF 3D Printing PETG and PCTG are practical, tough, general-purpose materials for functional prototypes, shop aids,
-
PLA for FDM / FFF 3D Printing PLA is one of the most common FDM/FFF materials. It is widely used because it
Understanding FDM / FFF 3D Printing Materials for Industrial Applications FDM/FFF 3D printing is not one material category. It is a manufacturing
Experience and Capabilities: Industrial Additive Manufacturing by JaegerTech Experience matters in industrial additive manufacturing. A useful part is not just something that
-
3D Printed Masking Fixtures for Painting, Coating, and Finishing Painting, coating, bonding, plating, and finishing operations often depend on repeatability. If operators
31st
31st
May, 2026
Choosing the Right Development Board for a Hardware Prototype Putting Hardware Into Your Prototype: Part 2 of a Five-Part Series In the
31st
31st
May, 2026
Using Development Boards in Early Hardware Prototypes Other Parts of this series: Part 2 – Choosing The Right Development Board Part 3
29th
29th
May, 2026
Why Bigger 3D Printed Parts Don’t Always Need High Resolution Many customers assume the finest layer height produces the best 3D printed
29th
29th
May, 2026
Why Supports Can Double the Cost of a 3D Printed Part One of the most common misunderstandings in 3D printing is the